The charging indicator (orange) of the headset lights up.
Charging is completed in about 3.5 hours (*) and the charging indicator turns off automatically.
*Time required for charging the empty battery to its full capacity. The charging time may differ depending on the conditions of use.
After charging is complete, disconnect the USB Type-C cable.
System requirements for battery charge using USB
USB AC adaptor
A commercially available USB AC adaptor capable of supplying an output current of 1.5 A or more
(If the output current is less than 1.5 A, the charging time will increase, and the music playback time after 3 or 10 minutes of charging will decrease.)
Commercially available USB AC adaptor compatible with USB PD (USB Power Delivery)
The charging time will be shorter with a USB AC adaptor compatible with USB PD. It is recommended to use a USB AC adaptor compatible with 5 V/2 A or 9 V/3 A output.
Personal computer
Personal computer with a standard USB port
We do not guarantee operation on all computers.
Operations using a custom-built or homebuilt computer are not guaranteed.
Hint
The headset can be also charged by connecting the headset to a running computer using the supplied USB Type-C cable.
If charging starts while the headset is on, the headset will turn off automatically.
Note
Charging may not be successful with cables other than the supplied USB Type-C cable.
Charging may not be successful depending on the type of USB AC adaptor.
When the headset is connected to an AC outlet or computer, all operations such as turning on the headset, registering or connecting to Bluetooth devices, and music playback cannot be performed.
The headset cannot be charged when the computer goes into standby (sleep) or hibernation mode. In this case, change the computer settings, and start charging once again.
If the headset is not used for a long time, the rechargeable battery usage hours may be reduced. However, the battery life will improve after charging and discharging several times. If you store the headset for a long time, charge the battery once every 6 months to avoid over-discharge.
If the headset is not used for a long time, it may take longer to charge the battery.
If the headset detects a problem while charging due to the following causes, the charging indicator (orange) flashes. In this case, charge once again within the charging temperature range. If the problem persists, consult your nearest Sony dealer.
Ambient temperature exceeds the charging temperature range of 5 °C - 35 °C (41 °F - 95 °F).
There is a problem with the rechargeable battery.
If the headset is not used for a long time, the charging indicator (orange) may not immediately light up when the headset starts charging. Please wait a moment until the indicator lights up.
If the usage hours of the built-in rechargeable battery decrease significantly, the battery should be replaced. Consult your nearest Sony dealer.
Avoid exposure to extreme temperature changes, direct sunlight, moisture, sand, dust, and electrical shock. Never leave the headset in a parked vehicle.
When connecting the headset to a computer, use only the supplied USB Type-C cable, and make sure to connect them directly. Charging will not be properly completed when the headset is connected through a USB hub.
It is not guaranteed that the headset works with all USB PD compatible equipment.
When the headset is charged using a USB PD compatible AC adaptor, the right unit may become hot, but this is not a malfunction.
Use the supplied USB Type-C cable to charge the headset before use. Connect the headset to an AC outlet. Use the supplied USB Type-C cable and a commercially available USB AC adaptor. The charging indicator (orange) of the headset lights up.
The WH-1000XM5 headphones feature intuitive touch control settings – for example, push the button on the left side to switch from Noise Cancelling to Ambient Sound or use the touch panel on the right side to play or pause music, skip tracks, change volume and much more.
The headset will automatically turn off after 15 minutes of not being worn. This setting can be changed using the “Sony | Headphones Connect” app. When storing the headset in a bag, etc., turn off the headset. Wearing detection may react incorrectly.
To make the most of the noise canceling function, turn off the Adaptive Sound Control, and try to turn on the noise canceling function manually when you need it. With the “Sony | Headphones Connect” app, check the setting of [Ambient Sound Control].
Launch the “Sony | Headphones Connect” app on your Android smartphone/iPhone to connect the headset to a smartphone or iPhone. For more details, refer to the “Sony | Headphones Connect” app help guide.
The WH-1000XM5 headphones feature intuitive touch control settings – for example, push the button on the left side to switch from Noise Cancelling to Ambient Sound or use the touch panel on the right side to play or pause music, skip tracks, change volume and much more.
By using the “Sony | Headphones Connect” app, you can change the settings of the wearing detection automatic music playback pause and resume function and the wearing detection automatic power off function (the battery saving function).
The WF-1000XM5 feature cutting-edge technology to deliver premium sound quality and the best noise-cancelling performance on the market. Real-time audio processors and high-performance mics power the specially designed driver unit Dynamic Driver X, for wide frequency reproduction, deep bass and clear vocals.
Introduction: My name is Kimberely Baumbach CPA, I am a gorgeous, bright, charming, encouraging, zealous, lively, good person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.
